Features: 1, V-cone flowmeter has a good accuracy (≤ 0.5%) and reproducibility (≤ 0.1%). 2, with a wide range ratio (10:1 to 15:1) 3, self-rectification function, only need a very short straight sections (the first 3D to 1D). Self-cleaning function can be measured dirt and easy scaling fluid, suitable for blast furnace gas impurities media. 5, self-protection, throttle key parts do not wear, to maintain long-term stability. 6, high temperature, high pressure, corrosion-resistant, not afraid of vibration. 7, the type of fluid to be measured very widely (liquid, gas, steam), a wide range of flow measurement (small flow to flow), adapt to pipes DN15 to DN3000. 8, V-cone flowmeter structural design is the structure of a fluid sweep, can not retain any entrained gas, liquid or solid contaminants, ideal for dirty fluid flow measurement, such as coke oven gas, wet gas, etc. 9, when the fluid flow through a special contour of the inner cone is formed in the vicinity of the boundary layer and the flow of fluid leaving the trailing edge of the cone, thus reducing the possibility of it being worn. 10 V cone flowmeter measurement of steam, hot water, no heat transfer station straight pipe. Due to the heat transfer station space is relatively small, the general flow meter straight pipe required longer affect the running accuracy, easy to plug in the measurement of blast furnace gas, a self-cleaning effect, the pressure tube. Details, please contact: http://www.jhzjyb.com/